Quote:
Originally Posted by Z06vette
I have used your crossmember on several first gen cars but all had stock subframe. It was close to floor but cleared. I'm kind of at a loss what to try next. Would your 2nd gen brackets work on first gen x member? Heres a few pics. Was hard to get the camera up in there to get a good shot. The left side is with the subframe bolts tightened down all the way. Right side the is about 1/4" between body bushing & floor.
|
Scott, here's a thought. Maybe your floor pan may have sagged over the years, if it's an original floor. My firebird has original floor pan, and the original crossmember will hit the floor on the pass side. A floor jack with a 2x4 underneath the sag fixed that.