[spode]

On the rotisserie to finish up some welding. Then Harbor Freight dollies and stands to keep it mobile. Started hanging body panels. The inner fender wells have to be raised 2.5" for ride height and widened 3" each side for track. Plan is to run it full width. I did end up re-drilling and narrowing the track width by 3/4" in the back. Car will be widened 6" in back and 5.5" up front. Every time I thought I had an idea how to make that work I would hang the body panels and not like the results. So I would move on to something else till I could come up with another idea. Eventually I decided to widened the tail panel 2", that really helped the rear of the car.













Starting to look like a Camaro again.