Quote:
Originally Posted by chichirone
We had a strange rattle over the last month and were chasing all kinds of remedies only to find the frame rail and Ridetech 4-link on our 1973 Trans Am "KLRBRD" has failed us. The frame rail cracked and the Airbar separated from the UCA mount. We are going to rebuild the suspension and are looking for some opinions, suggestions or ideas since we are not necessarily staring over, just looking to capitalize on an opportunity to improve performance if we can.
The car is at Dusold Designs in Lewisville, TX and we are working with Mike to look at alternative designs and using some of the components from the 4-link. We are considering DSE quarter-link or a 3 link setup. We don't have an open checkbook on this one but would like to definitely do it right so let m know your thoughts.
|
Check with RideTech first before you make any decisions.
The DSE quad is a great set up.