Quote:
Originally Posted by wiedemab
How does the Panhard mount attach to the rear axle?...assuming you can use a stock rear-end.
|
The panhard mount is integrated to the driver side frame mount. The other end is a bracket welded to the axle tube. We had planned on selling this as a kit completely welded with a 9" housing and axles. If you wanted to use a stock 10 or 12 bolt, we can probably accommodate that. I would have to check some dimensions. I think the mount should be fine. The extra strengthening gusset may get into the cast center portion of the 10/12 Bolt housing