Quote:
Originally Posted by 3_z28camaro
I have AME front and rear suspension on my 1969 Camaro. The thing I like most about them is the front uses C6 control arms so it can be easily replaced if ever needed.
As for the rear removing those stamped excuses for frame rails in the rear is only a good thing. In my case one was cracked and during removal I found that some of the original spot welds never penetrated all the way through to the body.
Having a real rear frame to attach to the front with connectors essentially creates a nice full frame. I have the triangulated 4-link but the three link and IRS are available as well.
Unfortunately the car is still on jack stands but AME has done well with their test car.
|
Hey
So far you dont regret getting AMS set up and whats the big difference between the 3 link and IRS. I am leaning towards their stuff because they actually buy most or part of it which works out good if your doing a long term project.