I agree with the previous post that your car is not lower in the rear, it only looks that way because of the difference in the arch of the front and rear wheel well openings.
I doubt there is anything wrong with the DSE stuff and I doubt that swapping them out for different leafs/shocks will change anything. Obviously you need to be measuring with the car on a level surface, not so obvious is how uneven level looking concrete can be. If you haven't done so already, move the car around and measure, I'll be it changes some. If you can't get happy with it you could experiment with a little shimming. You may not be able to get it perfect but should be able to get close.
|