freezing so I had to get out to the garage! Ok, barely above freezing but still .... had to get something done on the Camaro. Blasted winter and the snow!!!
Anyway, working on my outerwheel houses, roughed in and pretty close ... just need to trim and weld em together. The mod will give me 3 1/2 inches above the outer wheel lip .... which may be more than I have travel but just in case she's good!
This mod is more work than I thought
to get it dead nuts .... first one is always the hardest, other side should take less time!
Think I'll trim the lip 1/2 inch to get around 14 3/4 inches at 12 o'clock on the opening .... should be plenty for 315's or 335's.
Thanks for looking .....