Quote:
Originally Posted by 65 347
Guys looking to install a shoulder belt bar in my "65 mustang. I saw this pic of a first gen camaro on another site and can't remember where I saw it ask him any questions.
What I'm wondering is what size bar and thickness should I use and how do I tie the bar into the inner quarter. Is this strong enough for street driving and autocross driving?
I would like to have a bolt in bar for the rare chance I take the family to a local cruise night.
It will be interesting to see the opinions about this.
Thanks for the help.
Mike
|
This harness bar was constructed for "Snowblind", our 67 Camaro. We used 1 5/8" chromolly with 1" CM braces. The bar is attached to a removeable threaded mount (when removed will accept an upholstered plug) which is mounted to an 1/8" plate that fits into the recess in the body. we then have another plate backing it up to sandwich the body with 3 bolts. The braces mount to the subframe connectors.
