Quote:
Originally Posted by Nativefx
Just wondering if you have any ideas on how i could get rid of my stock parking brake pedal and relocate somewhere else? Not sure where, or how else to do this, but I've been looking for idea.
In your previous link you shared, it mentions that your kit requires 33 spline axles from Strange Engineering. I tried going to their website but for whatever reason it's down. Since I need a new complete shortened rear end w/posi, I was wondering if you had any recommendations who I might order the entire rear end from? You had mentioned in your post below that Strange was on board, so I was hoping I could look at their options online. Anyone in particular I should talk too? Other options to look at?
https://lateral-g.net/forums/showthread.php4?t=48782
Also, as I have already recieved my Forgeline wheels will they fit onto the hub you are offering and will the studs be the same size as those on my Baer Pro+ front hubs? |
Have you looked at Lokar's site yet?
http://www.lokar.com/product-pgs/eme...akes-main.html
Yes my "kit" requires that the hub side of the axle have 33 splines to match the C7 Hub. The carrier side will be determined by what carrier/spline you choose.
Have you considered purchasing your rear-end set-up from one of our site sponsors? I know both Vince & Donny over on my thread offered their services, and I know Ron would help out, and believe all have access to Strange products and will be able to guide you into a set-up that works best for you based on your car and your expectations.... of course I can help out with the my kit!
Yes, these hubs have 2.756" wheel pilot and should fit your Forgelines perfectly. The C7 Hubs come with metric studs and I will assume your Baer hubs have a 1/2-20 ?? Either way either you or I can outfit the C7 hubs with ARP studs to match what you have. Let me know.