Quote:
Originally Posted by JSM
Have you looked at Lokar's site yet? http://www.lokar.com/product-pgs/eme...akes-main.html
Yes my "kit" requires that the hub side of the axle have 33 splines to match the C7 Hub. The carrier side will be determined by what carrier/spline you choose.
Have you considered purchasing your rear-end set-up from one of our site sponsors? I know both Vince & Donny over on my thread offered their services, and I know Ron would help out, and believe all have access to Strange products and will be able to guide you into a set-up that works best for you based on your car and your expectations.... of course I can help out with the my kit!
Yes, these hubs have 2.756" wheel pilot and should fit your Forgelines perfectly. The C7 Hubs come with metric studs and I will assume your Baer hubs have a 1/2-20 ?? Either way either you or I can outfit the C7 hubs with ARP studs to match what you have. Let me know. |
Thanks for the input on parking brake options. I'll have to look into some of those options.
As for the rear end purchase, or any parts for that matter, I try and utilize site sponsors from Lat-G and PT as most all of them have been more than helpful when my limited knowledge needed some guidance! Most all of my other purchases have been through MCB as they are great to work with, and also Swain from Budnik as he offered me a great deal on the front brakes. With the floater rear end options and some of the newer products on the market, such as yours, it's more difficult trying to figure out who might be able to help.
I think you are correct about the 1/2-20 studs on the Baer hubs, I'd have to verify. I definitely want to outfit the rears with the same. Got your PM so I'll be in touch to discuss more in detail about your option. I'm starting to get a clearer idea on what I need, but then again I may be completely wrong and not even know it!
thanks, Jake