Short answer YES our Current sub will work with the Ridetech SKW front bags but they need to be installed upside down for the bag to clear. NO you will not run the drop spindles.
On the new sub, I feel there will be room for the bag/shock same deal it will need to be run upside down BUT I CAN NOT CONFIRM the fitment. part of the issue I see is that the shock is mounted SO CLOSE to the ball joint that the bag may interfere with the spindle ,caliper, and sway bar. I would go with out current version as we know that works.
Our sub will accommodate your wheel/tire although we would normally run that wheel with a 6.5" Bs.
If you know everything we make works why would you consider OTHER LS swap parts? it is not like ours are price out of line?? I just don't understand this thought process? we spend time fitting and testing these parts so you don't have to "Experiment" I can just about Guarantee the company that makes 20.00 mount plates has NOT test fit anything.
if you HAVE TO RUN AIRRIDE. then the new sub is really not for you. the suspension geometry is optimized for a specific ride height and although it is also designed for 4.5" of travel it is just over kill to then install less than optimum shock/ airbag set up. stick with the current version. it will DO everything you ever want or need it to do
|