Quote:
Originally Posted by samckitt
If air pressure only builds to 50 psi, & motor runs on & on, then air has to be escaping somewhere. Now that I think about it, I also had to replace the one way valve on the tank where tube from compressor enters tank. Maybe that is bad. Let it run until you get 50 PSI & shut it off & listen for air leak.
|
A check valve? If that's bad wouldn't the compressor shut down, or no?
There is no sound of air leaking after I shut it down, Huh .... is there a universal part? Guess I could remove it and test it first ... then look for a replacement.
Thanks again for chiming in ....