Forgot the vintage air
1 Red 10g to blower- use heavy orange that you deleted going out. Just come right off of the fuse panel. Back of FAN fuse port. Replace the 30 amp fuse with a 30 amp circuit breaker.
1 Red 18g ignition- relay feed. use the pink with that went to the ignition coil or pink ignition feed circuit.
1 Purple 18g wire - ignition switched 12v AAW has an AC fuse and wire, right under the fan fuse.
1 White 10g from blower to chassis ground
1 white 18g to chassis ground
1 blue 18g wire- to pressure switch to compressor clutch (feed through unused hole in the bulk head.
1 green 18g wire- to heater control valve (feed through unused hole in bulk head)
I like to run circuit breakers on the big circuits. Power windows and fans.
[IMG][/IMG]
Last edited by Vince@Meanstreets; 04-02-2015 at 11:51 AM.
|