[kwhizz]

Got a couple of things finalized today......Moved the rear cross member back by bolting it from the bottom of the frame mount using the front crossmember hole in the rear frame mount hole ......so ....It is only held in temporarily with 1 bolt per side........Mark will finish the frame mount mod's at his place as they have a person that Really knows how to weld......LOL.....I also thought I would see how the 2012 Camaro exhaust manifolds fit.........It seems they were made for this install......10 Minutes all installed with plenty of room everywhere........Got Lucky again........Next on the list is the Power Steering Pump.....A/C Compressor ......Radiator and trans cooling hose.......Fuel system....Here's a couple more pic's.....Plenty of room around the factory A/C on the firewall........