Item Location (City/State): Houston, Tx
Price: See Below
Description: See Below
Cleaning out all the LS leftovers, it all needs to go so open to any and all fair offers.
-- New ls3 corvette AC compressor (#89019337), AC bracket (#12569286), Idler pulley (#12560345), AC belt (#12579228), and all hardware. Basically everything needed to add AC to stock ls3 corvette accessory drive.
$325 +SHIP
-- Clean set of used LS valve covers, removed from 04' LQ4 with 40k miles, complete with bolts, but NO gaskets.
$40 +SHIP
-- Clean used 04' LQ4 intake assembly. Includes fuel rails, stock injectors, and intake bolts/gaskets.
DOES NOT INCLUDE THROTTLE BODY THAT IS PICTURED OR ANY SENSORS. Otherwise No cracks or problems.
$60 +SHIP
-- Clean low mileage dry sump ls3 & LS7 harmonic balancer.
$65 +SHIP
-- Complete accessory drive off 04' lq4 w/ 40 k miles. Came off a running truck with no issues, no leaks, weird noises etc. Bolt on and ready to go
Includes:
-Front Balancer
-AC Compressor w/ bracket, bolts, & belt
-Water Pump/thermostat housing, thermostat, & bolts
-Alternator
-Tensioner
-Power Steering pump, pulley, & bracket
-Main accessory drive belt
$300 +SHIP
-- Used LS3/L92 head rocker stand GM # 12600936. Was removed from a low mileage 6.2.
$5 +SHIP
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--LS1/LS2/LS3/LS7 GM factory spark plug wires. OEM nicer 90 degree boot version. Removed from a low mileage LS2, complete with all heatshields.
SOLD
-- New AP Brand (OEM brand/made in USA version) T56 clutch master cylinder & used but clean clutch master cylinder reservoir
SOLD
-- Clean used set of 04' LQ4 coil packs. These are the more desirable version withn the factory heat-sync. Great shape, just a little dusty.
SOLD
--NEW takeoff LS valvecovers complete with bolts and gaskets, removed from zero mile crate motor.
SOLD
-- Like New Texas Speed and Performance Torquer V2 Cam. 232/234 .595"/.598" 112 LSA Camshaft, used but in great shape with less 500 miles on cam. Was pulled to swap in a blower cam on a 6.0 that received a supercharger.
http://www.texas-speed.com/p-1149-te...-camshaft.aspx
SOLD
