Quote:
Originally Posted by Ketzer
Is the track width (WMS to WMS) the same as a stock sub?
Jeff-
|
Hi Jeff,
Correction:
I misspoke earlier about the WMS-to-WMS dimension on the new Speedtech 1st-gen subframe. I did start with a clean sheet of paper to design the geometry, so I didn't think the WMS-to-WMS dimension was the same. But it is. Not intentional to keep them the same. Just worked out that way.
__________________
Ron Sutton Race Technology
Last edited by Ron Sutton; 05-05-2015 at 04:11 PM.
|