Took a break from chassis/suspension grind yesterday afternoon to remind myself how lucky I was not to have been a framer my entire life.........
Material list:
12 - 96" kiln dried 2x4's
2 lbs 2.5" screws (128 screws)
Cost $40
Cut list:
24 - 14"
40 - 17.5"
Tool List:
Chop saw
Drill driver
Framers square
Small mallet (for tweaking alignment)
Finished height: 267.5 mm or for 57hemicuda 10-33/64" or 10.5315"
Time allotment: Approximately 4-5 uninterrupted hours.
My plan for turn plates is to use flexible cutting boards like these
http://www.amazon.com/Clear-Flexible...ds+for+kitchen and lubricate them with Crisco for dishwasher cleanup.