Justin,
I could use some motivation.
Ok, been traveling a lot for work, then got sick, but back at it..
Not much, but here's the updates from the last few weeks..
Trunk rough cut back to clean steel. Won't be carrying much in the way of groceries like this..
Made a cradle
test fit
and view from rear
Then I got some new parts delivered here at work
a pair of quarters, pair of trunk extensions, a front valance, and a rear valance..
and that brings us to this weekend.
I got to work for few hours Sunday..
I was able to tack down the center of the trunk floor, an fit and tack one trunk extension..
There was multiple repairs of layers of metal riveted over rotted metal, screen in other spots, all then smoothed over with bondo..
All getting cut away..
Still have to tack the trim pieces on the rear, and make a small patch where I cut the floor a bit longer than the patch panel
(should have waited for it to get here before cutting, lol) but it's progress..
Once it's all welded I will probably do a roll on bedliner coating on the floor like I did in my Roadrunner.
Next up, I hope to fit the right side trunk extension tonight, then start on the rear quarters this weekend.