Bar links installed w/ 7/8" spacers. LCA bump stops narrowed due to spring interference. Shocks installed. Chased camber/caster settings most of the day and finally got it in the zone. Thankfully I installed the offset UCA cross shafts because I had to flip the right side to obtain balanced settings.
Preliminary settings:
Left Cam/Cas -.6 / 5.6
Right Cam/Cas -.7 / 5.4
I plan on setting the toe at 1/16" total for a starting point.
Once it's on the ground and driven a bit so it settles in I'd like to get Cam/Cas Left -.5 / 5.0 and Right at .6 / 5.5.
My previous setup wouldn't allow caster above 4.0 without at least -1.0+ camber, so assuming my work is correct I'm somewhat satisfied...........but how it drives is the critical factor.
|