Quote:
Originally Posted by 1transam
Would the height be similar to a truck intake?
|
Here are the specs on it:
Base Plenum Top Mounting Flange Height 8.42 to the lifter valley cover flange on engine block.
Total Height with 92/102mm EFI Plenum Top 12.32 to the lifter valley cover flange on engine block.
Port Size 2.49 Height x 1.21 Wide
Mounting Flange Gasket Type Standard LS3 Molded O-Ring
Plenum Top Gasket Type 3/32 Round O-ring Cord
Throttle Body Flange Location, with 92/102mm EFI Plenum Top : Height 8.42 (from engine block lifter valley cover flange), Longitudinal Location 3.84 (forward from engine block front flange), Angle 25 deg. (down from vertical)
Runner Length 6.50, As-Cast Runner Cross-Sectional Area Tapered 4.25 in² to 2.77