[Sonar Chief]

waiting for SAE bolts from Dirty Dingo ...
went to Fastenal and picked some up and got the engine back in the frame! All is well, except .... I can't use the block mounted fuel pump, I'll have to rig up an electric and the drivers side bracket nut is touching #3 tube .... that's hot rodding thou!

Anyhow ... plenty of clearance for the headers, I'll probably have to move it a touch forward so the distributor will clear the firewall. I did put some heat on the drivers side header to see if I could raise the collector some w/o cutting the headers apart and rewelding ... got some clearance, it's cooling now, I'll see where it rests after it cools.













Thanks for looking ...