this is funny to me that I came upon this thread . ive been in my build process so long (06)after being swindled by a few vendors and shops that my car is finally coming into its own. I purchased gbar/glink and fab9 from another vendor whom was based in Orlando (another long story entirely) and is no longer in business, thankfully . now that I am finally at the stage to set ride height my fab 9 hits the crossmember and pinion angle wont help. while I am having the cage installed I was going to have them take a look at it and see what can be done or made to remedy my problem. Chassworks do you have a new product that I can bolt in or do you have a specific drawing or suggestions that I have made to solve my issue. any help or suggestions would be very much appreciated . I have to do some sort of modification to get proper measurements to order some JRI hydraulics so any input suggestions would be fantastic.
|