Yep, plugs directly into the Corvette fan module. Looks like the gray thing attached to the fan in this image.
You would have to do some research & see if the E38 ECM can control it. I can't remember which one I have. It would have to be programmed & wired to control it. I used 10 gauge wire for the power leads.
Quote:
Originally Posted by 67ragtp
Scott,
Is this the connector that plugs directly into the c6 PWM module?
I currently run dual Spals each controlled by a 35 amp relay and triggered by the E38 no AC. They hit hard when they turn on, can watch the voltage meter drop on initial turn on. Is the module and the connector all that's required for a softer start up? What gage power wire feeds the module?
Thanks Rich
|