Quote:
Originally Posted by Sieg
I'm running a Momo 320mm wheel with the NRG Gen 2.5 SRK-250BK quick release and their SRK-170H Short Hub.
The column housing to wheel mounting surface is 4-1/8" with the quick release and short hub. Beware: Their standard hub puts the wheel in your face!
I've had the 320mm wheel over 20 years and really like it, but I wouldn't go any smaller. FWIW I'm also running 12.7:1 ratio steering box.
Another thing to note is the NRG setup eliminates the typical 'crush hub' wheel adapter so you're compromising safety and should run a shoulder belt at a minimum.
|
Have any pics? How is the position compared to stock?
I'm definitely doing that same short hub. Not even sure they sell a diff one anymore. Want the gen 2.8 but was considering the slim for space.
Quote:
Originally Posted by Flash68
My car came with a 330mm Sparco and it was just weird small. I didn't realize how weird it felt til I tried a 350mm. Big difference. Swapped out to the 350mm and it's pretty much perfect. For me.
|
Yea fair enough. I think you and the guys at gap have convinced me to go 350 instead of 320.