View Single Post
  #6  
Old 07-16-2015, 02:53 PM
Vince@Meanstreets's Avatar
Vince@Meanstreets Vince@Meanstreets is offline
Senior Member
 
Join Date: Nov 2004
Location: Bay Area, California
Posts: 5,532
Thanks: 13
Thanked 18 Times in 12 Posts
Default

Quote:
Originally Posted by sledge33 View Post
just got the ls1 in my Camaro but I am having fuel pressure problems.i put a fuel pressure gauge on the car and when the fuel pump is cycled the pressure goes to 40lb but when the pump shuts off the pressure drops to 0lbs instantly.i can cycle the key 2-3 times and the car will start but been pulling my hair trying to figure out what the problem is.
I have a tanks inc tank with intank pump.it has a corvette filter that sets fuel pressure.return also comes off the filter.from the filter it goes straight to the rails.any ideas are greatly appreciated thanks jeff
If you are not leaking from what you can see and you are not flooding your engine (injector leak) it has to be in the pump. There should be a one way check valve to keep pressure up. These aftermarket tank pumps don't seem to be holding up.
__________________
MEANSTREETS PERFORMANCE

Dealer for
ACCUAIR rideheight control systems
ENTROPY RADIATORS XXX radiators for your pro-touring vehicle
FORGELINE MOTORSPORTS Highline custom 3 piece wheels
WEGNER AUTOMOTIVE Custom engines and LSX drive systems
SPEEDTECH PERFORMANCE Bay Area stocking dealer

NEVER FORGET -11
Reply With Quote