[rat_rod_russell]

Battery mounted with an SKFab battery box and some bolts welded to the back of it so we could mount it to the firewall.




Power steering lines are done and you can see we're using the auto transmission cooler for a rack and pinion cooler. I went in the bottom and out the top to keep it from all back flowing into the overflow tank since its under the top line and cut down on the length of line. I also told the customer if I'm crazy and there is a problem I'll install another cooler and different lines on my dime later. The column shifter cable is installed and tuned.



And the PRC Radiator System is installed for the final time and getting hooked up. We're going to use the radiator temp gauge hole for the steam vent line off the throttle body.



Later
-Russell @ Nerd Rods