Glass is easily scratched and not easily removed. And its easily seen, as were supposed to look through it not at it. And us builders, look at it.
So, contact a few different glass or scratch removal companies and it can be polished out. I bought a kit a SEMA a few years ago and it requires alot of practice to do it properly, but can be done. You will see distortations in the glass if looked at from a different angle, after all, you have to put in scratches to remove scratches....but, itt works...and is doable.
If you feel it with your fingernail, its a scratch, if your fingernail doesnt "grab" it, its a "rub", much easier to remove.....("0000" steel wool/rubbing compound)
Lemme know if you have any more questions,,,,,Mike
Btw, the kit parts are mfg by 3M, they know a thing or two bout materials. Its known as the "trizact" kit.....works very good, just requires many practice....
__________________
Mike
|