No chips for me but I was trying to super careful until I had to bring out the BFH! Still no chips though.
I respect the fact of the them supplying all the extra bolts and such, good thinking on there part, but when you do not describe where any of them go or what they might be used for is confusing. I literally used 2 bolts of the 8 supplied and those where for the steering arm to the spindle. I only have one side done, but I used the supplied wilwood bolts from the wilwood kit for everything else.
I think I might have to use shorter caliper bracket to spindle bolts, they seem long and at full turn look like they will hit the sway bar end link. But I also do not have tie rod connected yet.
|