Quote:
Originally Posted by tor1965
My car is a 1995 Chevrolet caprice / impala clone with ls3 and supercharger.
I have kor3 corvette zo6 brakes up front and still have the stock rear brakes.
The rear end is 8.5 C-clip with the abs sensor on the pinion, and the worst 3 channel abs system ever made.
What I want is a system that eliminates the C-clip, and has the provision for ABS sensors on both wheels. I live in Norway and I would need some kind of documentation to prove that the setup can hold the vehicle weight. Usually when I change a rear end to a different type I use the weight spec from the donor vehicle to prove that the axle is strong enough. With the corvette parts I think this could be a problem.
The total weight on the rear end of the car is 1213kg or 2674lb
Regards
Tor
|
You were not kidding when you said heavy!
I am not certain, and not sure how adaptable your ABS system is, but you may be able to suffice load ratings by running Camaro/Cadillac CTS-V Hub part#'s. I am almost positive they are identical dimensions as Vette but easy to prove ratings on these 4000+lb cars. I am not saying to even rule out the C6/7 hub part #'s either as if you could find specifications on them they are probably even rated for your weight loads??? I did a quick search and did not find anything but perhaps someone on this site can help if they know.
Jay