[Rod P]

big bar/soft spring?

for me...I run my 68 Camaro with 800 lb front springs and the DSE sway bar...my upper control arms pivot point has been moved from stock (modified Guldstrand) and that creates a jacking effect so essentially my car is in camber moment at all times...the lower control arm has the shock mount moved closer to the ball joint than standard arms....and the triple adjust front shocks i have run a digressive piston....on the rear I run a 325 spring and the triple adjust rear shocks i have run a digressive piston, I use the Helwig Protour rear bar....the weight of my car is 3150 with full interior, radio, heater and Cage the engine is a 6.0 LS.....

my set up is big bar/medium spring


hope that helps