Quote:
Originally Posted by 65_LS1_T56
Hey Lance,
Just a thought on the bolts: not sure what size they are, but what about going to a stud and nut configuration? I'm sure ARP has something that would work. You could put red loctite on the stud then.
If those are button heads, yeah, they suck in general. Usually, they are hard to remove, plus they have a smaller hex socket than a cap screw limiting torque in the first place.
|
I wanted to get longer cap head bolts and nut the back side of them but clearance between the back of the bracket and the frame is pretty tight already. Didn't think about studs, but that may be the answer if they start to come loose again...I think there is room there on the outside for a nut. Thanks for the idea...