Thanks Tom. A little update we relieved some pressure on the frame mounts with the engine crane and got to the mounts and loosened them and got enough slack to push the trans over to center it.
I bought a used X Factor cross member a while back and never realized how its made. It's two maybe 3/16" thick pieces sandwiched together on each side of the trans mount platform. Different for sure. Its for a T 56 but it lines up pretty well. It will take some mods to get it to work but it will let me hold the trans up for us to get my drive line angle figured out.
Last edited by waynieZ; 09-18-2015 at 09:17 PM.
|