Spraying SPI Epoxy
on the backside of the roof, driver's quarter and deck filler! Had to put it in epoxy because the Lizard Skin products are water borne so ... no bare metal!
First time spraying SPI ... I put down two coats following their directions and it came out nice. The sheen will be just right for interior panels and the roll bar as I am going to leave everything in SPI Black for maintenance if needed!
Once I got the roof off I started sanding the etching primer and cleaning the roll bar in preps for epoxy .... I will get Lizard Skin on these parts first and then move onto getting all the roof braces, behind the quarter, under the speaker tray and the roll bar in black epoxy. Supposed to rain overnite and maybe tomorrow, we'll see if that happens and adjust accordingly.
Seems ImageShack is having a lobotomy right now .. I'll upload pics later!
|