Quote:
Originally Posted by 2keaton11
I'm using a Sand & Street performance wiring harness. Do I have to change the whole harness out? Originally of course, it was not setup for an LSA
The vent lines I might be able to use, just seemed to fit real close even if I chose to modify the vent tube I have. I'll have to double check it.
|
I'd suggest calling them to see what they know, but I'd assume it won't have all the same sensors, but I'd assume it could be made to work but am not an expert.
I ended up just getting a trickflow steam vent setup for $100 and it fit fine as it is more customizable then a factory hard line.