Quote:
Originally Posted by MtotheIKEo
Quick search found this picture of a 2nd gen Ridetech install. Looks like the coiler mount was installed higher. Should be a quick fix to get an easy inch higher if you decide to try it out.
 |
Mine is the same as the one pictured. After a lot of back and forth with Rodney over at Ridetech, it turns out that some of my issues are with the front shocks. For whatever reason, I have only 9 total clicks available of what should be 24 with no way to determine where the 9 are within the compression range. They need to go back to Ridetech for them to determine what happened.
On a side note, I was able to weigh the car:
Other than moving the battery back to the trunk, I see no other weigh to bring the weight down in the front. That long nose is very heavy!