From what I recall talking with you and Eric while it was being built, Eric did slide the clamp so one side has a tube sticking out while the other has it recessed so they do interlock in that way. This may be what is being asked. Correct me if I am wrong here since it is your car.
Overall your car looked really really good out there. You need to ride with Robby Unser to figure out what aggressive really is even though you were obviously more aggressive than me this weekend. I rode with Robby and have concluded I'm a complete pansy with a ton to learn. I do have to say we had a good conversation with Robby about car setup while waiting in line, he's a really nice guy as well as a crazy driver.
Quote:
Originally Posted by carbuff
As I recall, they are Summit brand pieces:
http://www.summitracing.com/parts/sum-694300/overview/
Define interlocking? When these are assembled, but not completely tightened, we can rotate the 2 pipes to get the angles just right. So there isn't anything to 'lock' them in rotation if that is what you were wondering. We have often needed the ability to rotate them just a little to help with clearances as things go back together.
Hope that helps... |