Quote:
Originally Posted by cjfirstgen
Been there...went with the AMD door shells. They were really quite good but like all aftermarket metal it will take a little finesse to finish. Besides you have more rust that media blast cannot get to unless you remove the door skin altogether. I found that in the bottom corners where there was no evidence of rust yet the door skin was very thin as rust was soon to show itself. The last thing you want is rust bubbles showing up in five years in your expensive paint job. In other words my doors were not showing the rot yours are but it is what you cannot see that will bite you later. Do it right and have a peace of mind later. The labor involved in fitting aftermarket doors will be far less as well.
|
X2, I would not try to fix those doors.
Don