Looking at your first picture you posted it looks like the lower control arm mount to the right has the control arm mounting point crooked. It looks like it's at a slight slant going through the cross member which would explain why that control arm is lower where you measured. If you look at the picture you can even see that were he triangulated the control arms isn't equal on either side.
Is Ron Sutton able to help you fix the issue? Or do you have to scrap the frame? You could still use most of the parts and buy a bare Art Morrison subframe if funds allow?
__________________
Ahmad B
Last edited by Build-It-Break-it; 10-10-2015 at 07:39 PM.
|