Quote:
Originally Posted by snappytravis
I did look at that option somewhat Andrew, That is pretty sweet setup. However at the time It didn't seem that the main plug for the pwm controller was available. How did you terminate your wires to this end? I also am running 2 11 inch spal fans. I was under the understanding that I would need two pwm controllers. If I was to do It again I may try the corvette fan controller. What fan setup are you running?
The holley ecu's are pretty nice pieces when it comes to doing custom things such as this. I was over it and wanted to move on, to the next thing on the list and that is why I went with the relay setup. It was a simple solution. Thanks for the reply and the video. I will keep it in mind on the next project.  |
The consensus in this thread:
https://lateral-g.net/forums/showthread.php4?t=40215
is that the C6 fan controller will handle dual 11" fans without issues.
I am using a C6 fan. It is a cheap Dorman fan that was on super sale on Amazon for 80 bucks and it came with the proper connector to mate with the C6 controller. The C6 fan is rated at 400 watts, which works out to about a 31 amp draw at 13 volts. I used a Metripack 480 (32 amp) series 3 cavity connector on the other side to provide power and PWM- signal to the controller.
Andrew