Quote:
Originally Posted by andrewb70
The consensus in this thread:
https://lateral-g.net/forums/showthread.php4?t=40215
is that the C6 fan controller will handle dual 11" fans without issues.
I am using a C6 fan. It is a cheap Dorman fan that was on super sale on Amazon for 80 bucks and it came with the proper connector to mate with the C6 controller. The C6 fan is rated at 400 watts, which works out to about a 31 amp draw at 13 volts. I used a Metripack 480 (32 amp) series 3 cavity connector on the other side to provide power and PWM- signal to the controller.
Andrew |
So your fan setup is like this one? Then I plugs into controller. Then on the input side of pwm controller you have power, ground and trigger wire from your holley hp output extension harness?