Quote:
Originally Posted by pro66tour
I need your assistence with an issue I'm having with mounting my LS6 into my '66 Chevelle. I have installed 1 inch set back plates and stock motor mounts. As I lower the motor, the mounts were off line (through bolt holes) with the bigblock pedestal mounts that mount to the crossmember. Should I swap out for oem small block mounts?
Any advice would be great!
Thanks in advance…
|
Joe,
On my 70 a-body, the big block and the small block frame stands were the same. You may also hold off a bit as Holley is developing a system for LS swaps into A-bodies. There is a thread about this on ls1tech.com. I don't recall if early A-bodies were included, but it's a start.
Andrew