Quote:
Originally Posted by mikels
May be an issue of HPT not having correct address of fan type selection, but I can assure you - the software is in there.
BTW - GMPP tech support may be technically correct in that it is 'disabled' - but only by bit selection (not removal of code).
Dave
|
I hear ya on the "bit selection". Quite likely in the OS, rather than the hardware/firmware. And not only is the fan disabled, but the AC pressure sensor input is disabled too. I verified both with side by side testing. I was told the reverse lockout was also disabled, but didn't verify with testing.
I was also told that over-writing the GMPP E67 with a later model passenger OS would likely "brick" it. That's why I used a salvage yard 2012 MY controller.