At long last I finally have interesting things to post about my active project.
Some of you may recall that I posted a trial baloon rendering by Kris Horton of my project for feedback. Based on the feedback, Kris made some really nice changes and we have finally finished the exterior design.
Meanwhile, the fabrication has been underway for about a month. Below are the semi-final renderings. I am expecting to get the final hi-res pictures this evening.
Also, I now have a web site up which will document this project. You can check it out at
http://www.CamaroSuperCars.com
In short summary:
Built .060 over 396
FAST XFI
Comp roller cam
AFR 315 CNC port heads
F1-R Pro-Charger
T56
Quadralink
9", 3.70, Truetrac
Gobal west upper and lower control arms
Coil overs all around
DSE mini tubs
18X12 Forgeline SP3Ps with Gunmetal centers - rear
18x8.5 Forgeline SP3Ps - front
Wilwood 13 inch, 6 piston, C5 brakes in front
Wilwood 12 inch, 4 piston brakes with integrated e-brake in rear
DSE Quick Ratio 600 steering gear
See the web site for the entire tech sheet and tons of pictures...
I am pretty excited about this project...