Some updates to the progress.
Finished new Cooling system:
We went with a custom C&R radiator that had both the fill and return on the passenger side. It was pricey but at least I don't have to worry about a long lower radiator hose. We also had them use side mounts on the radiator apposed to top.
New T-Stat housing / New high flow water pump / New radiator / Fans / harness. Done!
Next up is Fuel system.
We pulled out everything old ran new lines from trunk to front with a feed / return.
patched up the hundred holes in the trunk and laid down a fresh coat of Por 15 and started reassembling.
Feed out of tank
New pump setup - shut off valve / filter / inline pump
new fuel pressure regulator with Return setup
finished product
road test went great no leaks, I do have a slight miss that feels fuel related so i'm going to be pulling the carb off and sending it to Competition Carbs in Reno to have them hot tank it, and work it over a little bit for the road course. I've already done Plugs / wires / coil / cap etc.
Now the car is at Mike M for suspension disassemble.