[CarlC]

On

Originally Posted by MtotheIKEo

You're fine. I believe Carl is referencing SS bolts found at your local hardware store. They generally have a pretty low UTS, about as strong as a Grade 2 bolt. The below link shows what is typically found at hardware stores, 70ksi tensile strength....
http://www.mcmaster.com/#socket-head...crews/=109atn3

ARP, DSE body bolts, etc... are VERY strong. See the link below for McMaster-Carr 12-point stainless cap screws with 170ksi tensile strength.
http://www.mcmaster.com/#standard-cap-screws/=109aspp

Link to ARP's stainless explanation (also 170ksi tensile strength)
http://arp-bolts.com/p/technical.php

This.

But, it also applies to the stainless fastener kits sold by the repro parts houses. From a structural standpoint, most all of it is of unknown quality, specifications, etc. I trust none of it.

Let's not delve into proper length specifications for double shear just yet either. ..... ;-)