I'm really behind on updates for this Mustang.
Got the VA HVAC controls modded and installed in the car.
IMG_1136
IMG_1137
Also installed the Dakota Digital VHX guage
IMG_1126
Installed the battery/200A resettable breaker on the main pos wire.
IMG_1203
Need to check the wiring as the VHX gauge acted strangely when I powered up the electrical system. At least I did not blow any fuses.
Got a 70 Mustang 1" m/c installed with Wilwood proportional valve/dist block and ran the front brake lines.
IMG_1206
Aso finished up the fuel system/lines. Corvette filter/regulator, 3/8 hardlines and AN fittings with flex lines. Hardline runs the entire length of the car, with AN flex lines running from the trunk bulkhead to hard line, and from engine fuel rail to hard line.
IMG_1225
Five months to Power Tours.