Full Chassis Camaro
Hey guys I'm possibly about to embark on a full chassis for my Camaro.
Is there any advantage to have the chassis bolt in versus welded to the body? I'm going to be running the bottom of the chassis same height as the sills so nothing will be hanging below and am in two minds whether to bolt in or weld in.
I'm 6'2 so head room is important. I see the Art Morrison chassis have 100x50mm internal frame cross members. This to me seems like it would limit headroom. Do you think its possible to mount seat brackets directly to the floor to get me back close to original seat height.
If anyone has done this or has pictures that would be great.
The chassis will be made up from a Speedtech front sub and custom everything else.
Thanks in advance.
Luke
|