Quote:
Originally Posted by kevin_l
Thats good to hear! I was going to go this route and hope for the best.
|
Keep in mind the small 5/8 nipple on the WP goes to the heater valve and the larger 3/4" fitting returns water to the pump.
I use the Dayco 87616 Small Id Hose to run from the 3/4" WP nipple to the 5/8" VA Heater fitting. The hose is a 5/8" hose the has a 3/4" bell on one end. Hose is 60" long.
Better the using adapters and crap. The 3/4" end is about 6" long. I cut off approx 5"