View Single Post
  #7  
Old 02-04-2016, 09:06 PM
Che70velle's Avatar
Che70velle Che70velle is offline
Senior Member
 
Join Date: Aug 2012
Location: Dawsonville Georgia
Posts: 2,248
Thanks: 641
Thanked 175 Times in 119 Posts
Default

Trey, I contacted Tanks upon receiving mine, and asked this same question. The vent that they send will only allow venting inwardly, which is fine since the tank needs this as the pump is pumping outwardly. I was concerned that perhaps I needed a vented gas cap, and the tech told me absolutely not.
There is no way that the supplied vent they send can allow fumes to enter the garage. It's a one way vent, and works well on mine, with no fumes in the shop at all. Make sure you mount it higher than the tank, and your golden.
__________________
Scott
---------------------------------------------------------------
70 velle' on custom chassis w/custom RideTech coilovers, RED sleeved 434” with Mamo 265’s, F-body Magnum, 12 bolt 3:73, wilwood 6/4's, bla, bla, bla...build. thread https://lateral-g.net/forums/showthread.php4?t=39631
New 434” engine build here https://ls1tech.com/forums/generatio...ved-block.html

Thanks Dad!!

My Chevelle is old school... It has a belt driven power steering pump.
They're 17's, but I keep em clean!
Reply With Quote