Not much of an update, but I will add that I've done a little shopping in anticipation of the 'April Overhaul'. I've never been able to get the SPC uppers adjusted for proper alignment specs (caster mainly) without compromising safety by having too little arm material inside the adjuster sleeve. Plus, I had reused the factory lowers with fresh ball joints and bushings. Speedtech ran a Christmas sale so I jumped on it and have new tubular uppers and lowers that should complement my AFX spindles nicely.
While at Barrett Jackson a few weeks ago, I cruised through the Ridetech booth and decided while I have the front end apart I'd might as well put some good shocks in it. I've driven a whopping 200 miles on the 2007 revisions to the suspension but that was enough to reveal the Edelbrock shocks were junk. So the Ridetech HQ single adjustables will remedy that shortcoming! I'm really looking forward to putting the front together the way it should have been when I went through it years ago.
__________________
Jeff: Project "Rolling Mockup" 69 Camaro SS, AFX, TKO600, Baer GT, etc
Last edited by JKnight; 02-15-2016 at 10:03 PM.
|